Skip to content
Ébénisterie SAM

Custom kitchen cabinets built in our Montreal-area workshop

Ébénisterie SAM builds your kitchen cabinets in its Dorval workshop, box by box, to the exact dimensions of your room. Allow 3 to 6 weeks of fabrication after the 3D plans are approved, then about one week of installation by our cabinetmakers. Price benchmarks: $35,000 to $90,000 for high-end cabinets, taxes extra.

By Akram Samman, master cabinetmaker · Last updated:

Cabinetmaking bench with a clamped oak cabinet door and hand tools
Mood image

In short: Ébénisterie SAM is not a reseller. Your cabinet boxes, doors and island are designed in 3D with you, built in our Dorval workshop and installed by the cabinetmakers who made them.

Who builds your kitchen cabinets?

The workshop is run by Akram Samman, master cabinetmaker, who has been building cabinets and millwork for 35 years. Every cabinet box is cut and assembled to the exact dimensions of your room, with no standard modules to pad out with filler strips. Out-of-square walls, uneven floors and ducts to work around, common in Montreal plexes, are planned for from the drawings.

The workshop can be visited by appointment. It is the best place to touch the wood species, compare finishes and try the hardware before you sign.

What do we build for your kitchen?

  • Cabinet boxes: base cabinets, wall cabinets and full-height pantry columns, up to the ceiling if you wish.
  • Doors and drawer fronts: flat, shaker or raised panel.
  • The island, with finishing panels on every visible side.
  • Built-in storage: pull-out pantry, corner storage, utensil drawers, recycling bins.
  • Integrated appliances: fridge and dishwasher behind matching panels, built-in hood, wall oven and microwave in a column.
  • Finishing: mouldings, toe kicks and finishing panels.

Which material should you choose for the fronts?

From most affordable to most expensive: thermofoil, high-density melamine, veneer, then solid wood or lacquer. For a high-end kitchen, three options come up most often:

MaterialStrengthsGood to know
Solid woodNatural grain, every door is unique; ideal for shaker doors and a statement islandCan be sanded and refinished years later
VeneerA thin sheet of real wood on a stable panel; the grain can run from one door to the nextStable even on large flat doors
LacquerPerfectly even colour, from matte to glossWipes clean easily; a hard knock can chip it

Many kitchens combine all three. Compare them in detail in our guide solid wood, veneer or lacquer; we bring samples to the visit.

How much do custom-built kitchen cabinets cost?

ProjectTypical rangeWhat the price includes
Cabinet refacing (boxes kept)$8,000 to $20,000Custom-made doors and drawer fronts, finishing panels, hardware; 2 to 4 days of installation
High-end custom cabinets (cabinets only)$35,000 to $90,0003D design, workshop fabrication and installation; solid wood, veneer or lacquer, island and storage accessories
Turnkey kitchen$35,000 to $90,000Demolition, plumbing and electrical, custom cabinets, countertops, backsplash, lighting, floors and paint; 2 to 8 weeks
High-end kitchen with structural changes$90,000 and upLoad-bearing wall removed, solid wood, waterfall island, integrated appliances

Indicative ranges for the Montreal market, taxes extra. Appliances are not included: add $4,000 to $15,000 for a set, depending on the range. What moves the price is explained in our guide custom kitchen cabinet prices in Montreal.

How long does it take to build a kitchen?

StepTimeline
Home visit, measurements and assessmentWeek 1
3D plans and detailed quoteWeeks 2 to 3
Cabinet fabrication in our Dorval workshop3 to 6 weeks after plan approval
Installation (cabinets only)About 1 week
Complete turnkey kitchen2 to 8 weeks after plan approval

Each step, and what you can prepare, is covered in our guide the steps of a custom kitchen project.

Custom or big-box kitchen?

A big-box kitchen costs less up front, but its modules come in standard widths and its finishes are limited to the catalogue. Custom-built cabinets use every inch of the room, in the material you choose, and are fitted by the people who made them. We compare both options honestly in our guide custom or big-box kitchen.

Where do we install our kitchens?

Across greater Montreal: the West Island, 10 to 15 minutes from the workshop, Montreal, Laval and the South Shore. The assessment visit is free with no obligation, and we call you back the same day.

FAQ: custom kitchen cabinet fabrication

Do you make just the cabinets, without redoing the whole kitchen?

Yes. We can build and install the cabinets only: allow about 3 to 6 weeks of fabrication after the plans are approved, then one week of installation. If the project also needs demolition, plumbing, electrical or countertops, we coordinate everything as a turnkey kitchen.

How much do custom-built kitchen cabinets cost?

Our Montreal benchmarks: $35,000 to $90,000 for high-end cabinets alone, and $8,000 to $20,000 for refacing if your cabinet boxes are sound. Taxes extra, appliances not included. The firm price comes after the free visit or from your plans.

How long does fabrication take?

About 3 to 6 weeks in our Dorval workshop after the 3D plans are approved, then one week of installation when only the cabinets are replaced. A turnkey kitchen is delivered 2 to 8 weeks after the plans are approved.

Can I visit the workshop before deciding?

Yes. The workshop at 809 avenue Lajoie in Dorval can be visited by appointment: you can see the wood species, finishes and hardware before choosing.

Can you work from my plans or my designer's?

Yes. Send us your plans: we prepare a detailed quote from them, then take measurements on site before fabrication starts.

My cabinet boxes are in good shape: do I need to replace everything?

Not necessarily. If the boxes are solid and the layout works for you, refacing (new doors, drawer fronts and hardware) costs $8,000 to $20,000 and is installed in 2 to 4 days.

Get a price for your kitchen

Send us a photo, your dimensions or your plans. We call back the same day and prepare an itemized quote, free and with no obligation.

Prefer to talk to someone?

Call 514 279-2626

Monday to Friday, 7 a.m. to 5 p.m.

Free quote in 30 seconds

Three quick questions. We call you back the same day.

Step 1 of 3No obligation

What is your project?
A few details about your project

Both fields are optional: skip ahead if you prefer.

Where can we reach you?

Same-day reply · No obligation · Free on-site assessment

CallFree quote